The boot: prompt waits for you to type advanced startup options.
If you don't type anything, the computer continues starting up normally. It
uses the kernel and configuration files on the startup device, which it also
uses as the root device. Advanced startup options use the following syntax:
[device]<kernel> [arguments]
Example arguments include
device: rd=<BSD device name> (e.g. rd=disk0s2)
rd=*<IODeviceTree path> (e.g. rd=*/PCI0@0/CHN0@0/@0:1)
kernel: kernel name (e.g. "mach_kernel" - must be in "/" )
flags: -v (verbose) -s (single user mode),
-x (safe mode) -F (ignore boot configuration file)
"Graphics Mode"="WIDTHxHEIGHTxDEPTH" (e.g. "1024x768x32")
For VESA 3.0 graphics, you may append a refresh rate
after an "@" character (e.g. "1280x1024x32@75")
kernel flags (e.g. debug=0x144)
io=0xffffffff (defined in IOKit/IOKitDebug.h)
If the computer won't start up properly, you may be able to start it up using
safe mode. Type -x to start up in safe mode, which ignores all cached
driver files.
Special booter commands:
?memory Displays information about the computer's memory.
?video Displays VESA video modes supported by the computer's BIOS.
Additional useful command-line options:
config=<file> Use an alternate Boot.plist file.
platform=ACPI|X86PC Use either ACPI or non-ACPI platform support.
Options useful in the com.apple.Boot.plist file:
"Boot Graphics"=Yes|No Use graphics mode or text mode when starting.
"Quiet Boot"=Yes|No Use quiet boot mode (no messages or prompt).
Timeout=8 Number of seconds to pause at the boot: prompt.
最新回复
QUOTE:
怎么选用其他可选内核???我的机器 是 intel P4 2.4c , MSI 865PE 主板 , 1GB 内存 (512x2) , GF5200 显卡 ...
谢谢...
The boot: prompt waits for you to type advanced startup options.
If you don't type anything, the computer continues starting up normally. It
uses the kernel and configuration files on the startup device, which it also
uses as the root device. Advanced startup options use the following syntax:
[device]<kernel> [arguments]
Example arguments include
device: rd=<BSD device name> (e.g. rd=disk0s2)
rd=*<IODeviceTree path> (e.g. rd=*/PCI0@0/CHN0@0/@0:1)
kernel: kernel name (e.g. "mach_kernel" - must be in "/" )
flags: -v (verbose) -s (single user mode),
-x (safe mode) -F (ignore boot configuration file)
"Graphics Mode"="WIDTHxHEIGHTxDEPTH" (e.g. "1024x768x32")
For VESA 3.0 graphics, you may append a refresh rate
after an "@" character (e.g. "1280x1024x32@75")
kernel flags (e.g. debug=0x144)
io=0xffffffff (defined in IOKit/IOKitDebug.h)
Example: mach_kernel rd=disk0s1 -v "Graphics Mode"="4096x4096x32@85"
If the computer won't start up properly, you may be able to start it up using
safe mode. Type -x to start up in safe mode, which ignores all cached
driver files.
Special booter commands:
?memory Displays information about the computer's memory.
?video Displays VESA video modes supported by the computer's BIOS.
Additional useful command-line options:
config=<file> Use an alternate Boot.plist file.
platform=ACPI|X86PC Use either ACPI or non-ACPI platform support.
Options useful in the com.apple.Boot.plist file:
"Boot Graphics"=Yes|No Use graphics mode or text mode when starting.
"Quiet Boot"=Yes|No Use quiet boot mode (no messages or prompt).
Timeout=8 Number of seconds to pause at the boot: prompt.
使用方法:
光盘启动开始倒数数时按F8键,此时输入启动参数,正如楼上所列
比如内核默认的是mach_kernel,如果你想选其他内核,请输入其他内核的名字(这个要查看破解盘的说明文档,是不是光盘里提供了不同的内核文件,还要知道内核文件的名字,区分大小写),然后回车启动
哎！苹果啊，苹果！